The dedicated EZEJUMP app for Android is no longer available. 90% of our clients use iOS, so the decision was made to deprecate the Android EZEJUMP App.
Ezejump control, operation and data collection have been integrated into the Swift Syncro App.
Ezejump control, operation and data collection have been integrated into the Swift Syncro App.
For those of you who require to use the app on Android, you can download the APK here, for subsequent side-loading into you device.Please contact us for the APK to be emailed directly.
Please note this Android APK is not supported in any way
Be sure to keep the app and iPhone or iPad updated on your device at all times.
Connecting to EZEJUMP
The EZEJUMP connects to your mobile device or tablet via BLE only.
The entire connection process is carried out within the EZEJUMP application – you do not need to navigate to your device BT Settings in order to connect at all.
Open the EZEJUMP app on your device.
Make sure BT is enabled on your device.
Turn on your EZEJUMP by pressing or stepping on the device. You will see a blue light flashing on your EZEJUMP to indicate it is now available to connect.
Once the EZEJUMP app on your device detects the EZEJUMP hardware, you will be prompted to connect to the device as per the below screenshot. Select the EZEJUMP serial number shown on screen to connect.
Operation
Before first use, please remove protective film.
Charge the EZEJUMP Mat
Run the EZEJUMP App on your Apple or Android device
Turn on the EZEJUMP Mat by tapping one of the switching zones
Check the battery status on the mobile App to ensure that you can run the jump test with the current battery capacity
Select the athlete you want to test
Select the test you want to run on the App
Exercise the jumps, corresponding to the test
When you have finished the jump test, turn the Mat off via the EZEJUMP menu found in the top right corner of your app
Charging
Connect the supplied wall socket charger with the wireless charging pad and place the pad onto the EZEJUMP Mat as shown. The Charging Indicator turns red while charging and turns off when the battery is fully charged. It takes 1.5 to 2 hours for a flat battery to be fully charged. If the EZEJUMP is fully charged, the Charging Indicator will not turn on at all.
Storage
The EZEJUMP Mat can be stored flat on the ground, upright, or in the EZEJUMP carry case. Whenever it’s NOT stored in the carry case, please make sure, that neither of the mat’s contact zones are activated to avoid excessive battery discharge.
Having Problems?
Please visit our support page on www.swiftperformance.com/support
for online help.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article