If you are experiencing erratic behaviors with your timing gate operation, the likely cause is Wi-Fi latency due to congestion on the channel that Syncro has automatically selected.
Syncro is setup by default to automatically choose one of the 11 available Wi-Fi channels.
For reasons unknown, it may be choosing a less than optimal channel, and setting this manually will more than often resolve the issue.
If you have a PC with Microsoft Wi-Fi Analyzer installed you can see which channels are in use and also where the Swift network is setup.
In Syncro >Options You will see a 'Select Wi-Fi channel' option that will be , by default set to 'Auto' . Set this to different channel number, and then connect the gates, and re-run the test.
NOTE: You need to reboot all gates when you make a channel change.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article