Aligning your system

Modified on Mon, 15 May, 2023 at 7:22 PM

Once connected to Syncro, the App will instruct you to align your gates.


Aligning your gates means to place the reflector and gate opposite one another and align the laser dot emitting from the gate to the target in the middle of the reflector face.


Unaligned gates will flash their respective colour, the corresponding gate within the app will also flash.


When the gate is moved into the correct alignment with the reflector it will beep once and the strobe will turn solid.
After 5 seconds of being in this position the gate strobe and laser will turn off, and the gate strobe will pulse every 10 seconds or so, this indicated the gate is aligned and ready for you to run a test.


If the gate falls out of alignment between setup and test run, the App will not allow you to run the test and indicate what gate you need to realign.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article